A simple and efficient triangular finite element for plate bending

A simple and efficient triangular finite element is introduced for plate bending application. The element is a three-node triangular one with three basic degrees of freedom per node and two internal rotation degrees of freedom, using selective reduced integration. Numerical examples indicate that, despite its simplicity, the element is not only competitively accurate, but also useful as a thick/thin triangular plate bending element. It is also pointed out that this element using selective reduced integration is in fact a mixed element.     

A Nonlinear Galerkin/Petrov-Least Squares Mixed Element Method for the Stationary Navier-Stokes Equation

A nonlinear Galerkin/ Petrov- least squares mixed element (NGPLSME) method for the stationary Navier-Stokes equations is presented and analyzed. The scheme is that Petrov-least squares forms of residuals are added to the nonlinear Galerkin mixed element method so that it is stable for any combination of discrete velocity and pressure spaces without requiring the Babuska-Brezzi stability condition. The existence, uniqueness and convergence ( at optimal rate ) of the NGPLSME solution is proved in the case of sufficient viscosity ( or small data).     

Thermal radiation effect on mixed convection from horizontal surfaces in saturated porous media

An analysis is presented to investigate the effect of radiation on mixed convection from a horizontal flat plate in a saturated porous medium. Both a hot surface facing upward and a cold surface facing downward are considered in the analysis. The conservation equations that govern the problem are reduced to a system of nonlinear ordinary different equations. The important parameters of this problem are the radiation parameter R, the buoyancy parameter B, and the freestream to wall temperature ratio T _∞/T _w for the case of a hot surface or the wall to freestream to wall temperature T _w /T _∞ for the case of a cold surface.     

Bending Solutions for Inhomogeneous and Laminated Elastic Plates

A procedure has been developed in previous papers for constructing exact solutions of the equations of linear elasticity in a thick plate of inhomogeneous isotropic linearly elastic material in which the elastic moduli depend in any specified manner on a coordinate normal to the plane of the plate. The essential idea is that any solution of the classical thin plate or classical laminate theory equations (which are two-dimensional theories) generates, by straightforward substitutions, a solution of the three-dimensional elasticity equations for the homogeneous material. Recently this theory has been formulated in terms of functions of a complex variable. It was shown that the displacement and stress fields in the inhomogeneous material could be expressed in terms of four complex potentials that are analytic functions of the complex variable ζ = x + iy in the mid-plane of the plate. However, the analysis performed so far applies only to the case of a plate with traction-free upper and lower faces. The present paper extends these solutions to the case where the plate is bent by a pressure distribution applied to a face.     

随机压电智能桁架结构闭环控制概率动力响应分析

针对随机压电智能桁架结构研究了基于概率的结构闭环控制系统动力响应分析模型与方法．考虑结构的物理参数、几何尺寸、外荷载幅值以及闭环系统控制力同时具有随机性时，利用振型迭加法导出了结构动力响应随机变量的数字特征计算表达式．通过算例考察了智能结构物理参数、几何尺寸、外荷载幅值以及控制力的随机性对结构闭环控制系统动力响应的影响，并获得了若干有意义的结论．     

A variant of the low-Reynolds-number two-equation turbulence model applied to variable property mixed convection flows

Previous work has demonstrated that the low-Reynolds-number model of Launder and Sharma (1974) offers significant advantages over other two-equation turbulence models in the computation of highly non-universal buoyancy-influenced (or “mixed convection”) pipe flows. It is known, however, that the Launder and Sharma model does not possess high quantitative accuracy in regard to simpler forced convection flows. A variant of the low-Reynolds-number scheme is developed here by reference to data for constant property forced convection flows. The re-optimized model and the Launder and Sharma formulation are then examined against experimental measurements for mixed convection flows, including cases in which variable property effects are significant.     

多工况多约束下离散变量桁架结构的拓扑优化设计

提出了一个多工况下受应力、位移约束的离散变量桁架结构的拓扑优化方法，给出了结构拓扑形式变更时的约束处理方法及杆件删除策略，使基结构设计空间的维数不断降低，达到最优拓扑，避免了奇异解的出现，在算例中指出了截面离散集和位移约束对最优拓扑的影响；算例给出了满意的拓扑优化解。     

An efficient method for solving the mixed direct-inverse problem of the transonic rotational flow in plane casades

The method in [1] has been extended to the case of rotational flow in this paper. A new method for dealing with the shock wave is presented. This method has the advantages of both the shock-fitting and the shock capturing methods. The direct problem and the mixed direct-inverse problem of the rotational flow in a transonic plane cascade at both design and off design conditions are solved, and the results show that the present method has rapid convergence rate and high accuracy even for the flow with moderately strong shocks. The calculations have been carried out on the DPS-8 computer, and for the direct problem, only 50–80 iterations are needed, and 50–80 seconds of CPU time are required.     

非牛顿流体经波纹管流动的阻力特性

本文对Carreau流体经波纹管的蠕动流的阻力特性用差分方法作了数值求解。先施行坐标变换,提出一种保证周期性条件的混合迭代法,能较快得到问题的收敛解。流体的物质参数以及流动区域的几何参数对流动阻力特性的影响作了讨论,同时指出了直径均匀的毛管模型作为渗流模型的不足之处。     

Mixed Convection in a Horizontal Channel with Local Heating from Below

Mixed convection induced in the entrance region of a horizontal plane channel by a bottom heat source of finite dimensions is considered. The calculations were performed for the Prandtl number Pr = 1, Grashof numbers ranging from 4 · 10³ to 3.2 · 10⁴, and Reynolds numbers varying from 0 to 10. The dimensions of the heat source and its location were also varied. The results were obtained from a numerical solution of the 2D unsteady Navier-Stokes equations in the Boussinesq approximation, written in vorticity – stream function – temperature variables. The solution was found by the Galerkin finite element method.